SCN5 / SCN6 Hardware Thread

Topics and questions about actuators etc.

Re: SCN5 / SCN6 Hardware Thread

Postby museumsteve » Sat 22. Jun 2013, 11:13

I will check version as soon as I get home this evening.
museumsteve
X-Sim Supporter
 
Posts: 79
Images: 10
Joined: Fri 6. Apr 2012, 03:01
Has thanked: 1 time
Been thanked: 0 time

Re: SCN5 / SCN6 Hardware Thread

Postby museumsteve » Sun 23. Jun 2013, 13:34

I grabbed latest version and it told me ILK pin issues, so I re-wired my kill switch and re-soldered diode/resistor and it came back to life :)
But, it doesn't like my shuttle PC anymore as it sometimes finds them and sometimes doesn't. I've had problems with other software over the network between game PC and client (shuttle) so I think I will go the one PC route for now or end up getting a new PC for client and use the shuttle as a doorstop :D
museumsteve
X-Sim Supporter
 
Posts: 79
Images: 10
Joined: Fri 6. Apr 2012, 03:01
Has thanked: 1 time
Been thanked: 0 time

Re: SCN5 / SCN6 Hardware Thread

Postby sirnoname » Sun 23. Jun 2013, 14:10

No, there is no problem with your PC.
There is always the driver.
Do you use a RS485 converter with FTDI Chip? (I think you use, but take a picture ...)
If a answer is correct or did help you for a solution, please use the solve button.
User avatar
sirnoname
Site Admin
 
Posts: 1743
Images: 45
Joined: Thu 1. Sep 2011, 22:02
Location: Munich, Germany
Has thanked: 35 times
Been thanked: 122 times

Re: SCN5 / SCN6 Hardware Thread

Postby museumsteve » Sun 23. Jun 2013, 14:23

Yes,. 2 RS485 adapters. I did update to latest FTDI drivers (think they were dated Jan 2013 )
I can take pics later anyway (working today) after I've been to the cinema to see World War Z :)
museumsteve
X-Sim Supporter
 
Posts: 79
Images: 10
Joined: Fri 6. Apr 2012, 03:01
Has thanked: 1 time
Been thanked: 0 time

Re: SCN5 / SCN6 Hardware Thread

Postby sirnoname » Sun 23. Jun 2013, 16:45

So please goto the advanced setup in the device manager and set:
a.) printer support chackbox (right)
b.) 1ms instead of 16ms delay

Also try to install an older driver.
Let me know what happens ...
If a answer is correct or did help you for a solution, please use the solve button.
User avatar
sirnoname
Site Admin
 
Posts: 1743
Images: 45
Joined: Thu 1. Sep 2011, 22:02
Location: Munich, Germany
Has thanked: 35 times
Been thanked: 122 times

Re: SCN5 / SCN6 Hardware Thread

Postby elpadrino » Mon 26. Aug 2013, 03:27

Hello to all,

I'm looking to adquire 2 SCN6 actuators. I've been asking in FREX and Miariintech but I expect to find something cheaper. Do you know any webpage or seller to buy these actuators??

Thank you :D
elpadrino
 
Posts: 5
Joined: Mon 26. Aug 2013, 03:24
Has thanked: 0 time
Been thanked: 0 time

Re: SCN5 / SCN6 Hardware Thread

Postby mino74 » Sun 3. Nov 2013, 18:13

hello guys

i am a question regarding power connecting on snc5 150 mm ok lets start

on the forum there is this draw showing ilk on the center number 8 when i saw the my cable is grean color but on dyadic draw is brown color can anyone tell me how did this ?

thanks
mino74
X-Sim Supporter
 
Posts: 50
Joined: Fri 20. Sep 2013, 16:57
Has thanked: 1 time
Been thanked: 0 time

Re: SCN5 / SCN6 Hardware Thread

Postby mino74 » Sun 3. Nov 2013, 18:14

i mean grey not green
mino74
X-Sim Supporter
 
Posts: 50
Joined: Fri 20. Sep 2013, 16:57
Has thanked: 1 time
Been thanked: 0 time

Re: SCN5 / SCN6 Hardware Thread

Postby Carl » Fri 21. Mar 2014, 23:18

Hey there, I got the same problem. On my scn6-40-150 pin 8 there is a green cable. Was thinking of emailing Kevin @ Mirai. Really dont wanna damage them before I even use them. Any advice would be very much appreciated.
Carl
X-Sim Supporter
 
Posts: 59
Images: 115
Joined: Sun 29. Jul 2012, 19:13
Location: North Hampshire UK
Has thanked: 6 times
Been thanked: 1 time

Re: SCN5 / SCN6 Hardware Thread

Postby sirnoname » Fri 21. Mar 2014, 23:27

Colors are different, pincount is what you need.
If a answer is correct or did help you for a solution, please use the solve button.
User avatar
sirnoname
Site Admin
 
Posts: 1743
Images: 45
Joined: Thu 1. Sep 2011, 22:02
Location: Munich, Germany
Has thanked: 35 times
Been thanked: 122 times

PreviousNext

Return to Actuators

Who is online

Users browsing this forum: No registered users and 1 guest