SCN5 ignoring

Topics and questions about actuators etc.

SCN5 ignoring

Postby Lanz » Sat 3. Jun 2017, 18:40

Hi, I have this error,

Found SCN5 actuatot but emergency stop (ILK pin) was executed
The actuator wil be ignored until ILK pin is tied to 24 again

My adapter ;
My actuators SCN5 -010-150-s03
S/N9C 931 KR

Bought in korea MADE IN JAPAN

First I made, the connections as they are in the diagram, with the resistance and the diode

and then

I connected the gray wire (pin 8), to 2V without resistance, and I have the same error.
I have connected it to 0v, and I have the same error

I do not know what else to do
Posts: 5
Joined: Fri 12. Aug 2016, 20:06
Has thanked: 0 time
Been thanked: 0 time

Re: SCN5 ignoring

Postby sirnoname » Sun 4. Jun 2017, 10:58

As written in the SCN5 post, the SCN Tools can disable the pin via original software.
On the other side it can be defect by overcurrent.
2V are not high state, also written in the post.
If a answer is correct or did help you for a solution, please use the solve button.
User avatar
Site Admin
Posts: 1785
Images: 45
Joined: Thu 1. Sep 2011, 22:02
Location: Munich, Germany
Has thanked: 35 times
Been thanked: 124 times

Return to Actuators

Who is online

Users browsing this forum: No registered users and 1 guest