Frex hyper axis 100

Topics and questions about actuators etc.

Frex hyper axis 100

Postby schindluder » Sun 23. Aug 2015, 15:04

hello all,

i'm going to build a 3dof motion sim, and now i'm searching for the right actuators. first i wanted to buy 3 scn 6 150 from frex (because of the low price), but then i saw this:

HyperAXIS100
Strong Lifting Power and Hi Speed Custom Actuator
Lifting capacy 100Kg
Stroke 100mm

unfortunately there's nothing said about the speed of this actuators - only hi speed... does anybody know how good they are? are 100 mm enough for good motion (i would take them just for the seat)?

thanks in advance
schindluder
 
Posts: 2
Joined: Sat 22. Aug 2015, 21:41
Has thanked: 0 time
Been thanked: 0 time

Re: Frex hyper axis 100

Postby sirnoname » Sun 23. Aug 2015, 15:55

150mm/s + continous work are the points
If a answer is correct or did help you for a solution, please use the solve button.
User avatar
sirnoname
Site Admin
 
Posts: 1743
Images: 45
Joined: Thu 1. Sep 2011, 22:02
Location: Munich, Germany
Has thanked: 35 times
Been thanked: 122 times

Re: Frex hyper axis 100

Postby schindluder » Sun 23. Aug 2015, 17:07

that means they will keep the speed under load? would you recommend them, or are the scn6 good enough. i'm also afraid that 100mm are not enough for the seat.
schindluder
 
Posts: 2
Joined: Sat 22. Aug 2015, 21:41
Has thanked: 0 time
Been thanked: 0 time

Re: Frex hyper axis 100

Postby sirnoname » Sun 23. Aug 2015, 18:37

For example: frex 100mm, used ~80mm to avoid end contact, 400mm/s -> 150mm/s under load. 24hrs, 7 days. recirculating ball instead of nuts.

Many use 150 but I do not think it is usefull. SCN6 are many times slower but needed for person > 90kg
If a answer is correct or did help you for a solution, please use the solve button.
User avatar
sirnoname
Site Admin
 
Posts: 1743
Images: 45
Joined: Thu 1. Sep 2011, 22:02
Location: Munich, Germany
Has thanked: 35 times
Been thanked: 122 times


Return to Actuators

Who is online

Users browsing this forum: No registered users and 1 guest