Finished 2DOF 12V DC wiper arduino playseat

Finished projects, you can't start topics here and have to request a topic in the "administrator" section first.
Please use the image gallery for your pictures, a short tutorial can be found here.
The first image in the first post will be shown in the project gallery.

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby guirrou » Tue 14. Jun 2016, 16:23

Greetings

I started fabricating a 2dof simulator using only one laptop and i'm wondering how to connect x-sim with arduino and how to configure x-sim.

regards
Guirrou Hamza
guirrou
 
Posts: 2
Joined: Tue 7. Jun 2016, 09:33
Has thanked: 0 time
Been thanked: 0 time

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby RacingMat » Tue 21. Jun 2016, 21:53

At which step of the tutorial are you stuck?
2 DOF playseat : arduino, motomonster, 12V truck wiper motors
http://www.x-sim.de/forum/viewtopic.php?f=37&t=943
User avatar
RacingMat
X-Sim Stage 2 edition
 
Posts: 451
Images: 147
Joined: Wed 20. Feb 2013, 21:30
Location: Marseille - FRANCE
Has thanked: 4 times
Been thanked: 121 times

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby TomKlash » Thu 30. Jun 2016, 07:37

Hi,

I have a question about the electrical connection between ARDUINO UNO and MOTO MONSTER. If i choice to mont MOTO MONSTER on ARDUINO CARD can i plug all pins or just this ? Cause It's more simple to connect all pins and have all acces on the top of MOTO MONSTER to connect potentiometer for exemple...

Arduino .../...Motomonster
......GND <-> GND pin
........5V <-> 5V
.....pin 4 <-> pin 4
.....pin 5 <-> pin 5
.....pin 6 <-> pin 6
.....pin 7 <-> pin 7
.....pin 8 <-> pin 8
.....pin 9 <-> pin 9

pin 13 is not needed
on the pictures, I've soldered more wires (but they are unused wire...).


Arduino and Motomonster stacked %285%29.JPG
Arduino and Motomonster stacked %285%29.JPG (12.7 KiB) Viewed 1656 times
TomKlash
 
Posts: 14
Joined: Fri 10. Jun 2016, 17:37
Has thanked: 0 time
Been thanked: 0 time

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby RacingMat » Thu 30. Jun 2016, 07:52

Stacking the 2 boards is fine! :-)
2 DOF playseat : arduino, motomonster, 12V truck wiper motors
http://www.x-sim.de/forum/viewtopic.php?f=37&t=943
User avatar
RacingMat
X-Sim Stage 2 edition
 
Posts: 451
Images: 147
Joined: Wed 20. Feb 2013, 21:30
Location: Marseille - FRANCE
Has thanked: 4 times
Been thanked: 121 times

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby TomKlash » Thu 30. Jun 2016, 08:40

Connecting all pins ?
TomKlash
 
Posts: 14
Joined: Fri 10. Jun 2016, 17:37
Has thanked: 0 time
Been thanked: 0 time

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby Leme » Tue 12. Jul 2016, 15:15

Hi,

I like your project, but I have a question. The two 24V motors are conect in 12V output Monster Moto Shield?

thanks.
Leme
 
Posts: 2
Joined: Tue 12. Jul 2016, 14:46
Has thanked: 0 time
Been thanked: 0 time

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby cpnemo » Wed 21. Sep 2016, 11:42

Hi everyone and RacingMat

I have problem about my project such as......
1. I'm not sure the converter and extractor work to correct ?
2. My DC Motor respond especially Right side but Left side don't work because ? (Arduino+Monster motor shield)

p.s. I will follow you step to step.

Thank you for reply.
cpnemo
 
Posts: 3
Joined: Mon 21. Mar 2016, 16:27
Has thanked: 0 time
Been thanked: 0 time

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby Bora » Thu 2. Mar 2017, 02:23

Firstly thanks for your topic it's very useful,

I have a problem and a question also, I built a prototype and I'm testing position and movement from Arduino Serial Port, when I testing it, the motors are too fast. I use 12 V DC 55 rpm Wiper Motors.

What should I do?
How can I reduce the speed of motors?
If I drop the speed in arduino program, will the speed decrease while playing with xsim?

I thank you for your response...
Bora
 
Posts: 7
Images: 12
Joined: Sat 27. Aug 2016, 17:56
Has thanked: 2 times
Been thanked: 2 times

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby RacingMat » Thu 2. Mar 2017, 09:41

Thanks Bora!

Your motors specifications look good and not too fast. :!: personnaly, I would advice 70rpm

You could reduce the speed in the code but, in fact, under load, the speed will significantly decrease. Don't bother about this :D
2 DOF playseat : arduino, motomonster, 12V truck wiper motors
http://www.x-sim.de/forum/viewtopic.php?f=37&t=943
User avatar
RacingMat
X-Sim Stage 2 edition
 
Posts: 451
Images: 147
Joined: Wed 20. Feb 2013, 21:30
Location: Marseille - FRANCE
Has thanked: 4 times
Been thanked: 121 times

Re: Finished 2DOF 12V DC wiper arduino playseat

Postby Vinicius » Mon 6. Mar 2017, 22:09

I'm from Brazil and I'm writing to thank you for your post. With them and other articles here of the forum, I was also able to mount a simulator 2 dof. Follow test video.
Https://www.youtube.com/watch?v=2NykL-YF6Nc

Tks
Vinicius
Last edited by Vinicius on Wed 29. Mar 2017, 17:00, edited 1 time in total.
Vinicius
 
Posts: 10
Joined: Wed 4. Jan 2017, 10:22
Has thanked: 3 times
Been thanked: 0 time

PreviousNext

Return to Motion simulator Finished Project Gallery

Who is online

Users browsing this forum: No registered users and 1 guest

cron